Possibilities • Solar
Solar Systems & Panels Photos
See examples of rooftop panel arrays, clean wiring, and professional installs. Serving residential and commercial projects across Texas.
Solar system types we install
Every property and power goal is different. We help you choose the right system type, then install it cleanly and safely for Texas weather.
- Grid-tied solar: Most common. Offsets your utility bill and can export power (net billing/net metering depends on your provider).
- Hybrid solar + battery: Adds backup power and time-of-use optimization where available.
- Off-grid systems: For remote properties—requires battery storage and careful load planning.
- Ground-mount arrays: Great when roof space is limited or you want ideal tilt/orientation.
- Commercial solar: Larger arrays, 3-phase electrical, and production goals tied to operating hours.
Installation ideas
- South- or west-facing roof planes to maximize afternoon production
- Split arrays on multiple roof faces to smooth production through the day
- Ground-mount with clear access for cleaning and maintenance
- Battery + critical-loads subpanel for fridge, lights, Wi‑Fi, and select outlets
- EV-ready setup (panel capacity + conduit planning)
Core components
- Panels (modules), racking/rails, and roof flashing
- Inverter (string or microinverters) + rapid shutdown
- Combiner/disconnects and labeling
- Monitoring (app + production reporting)
- Battery storage (optional) + backup gateway
Mounting options (roof + ground)
- Asphalt shingle: Proper flashing and attachment spacing to protect the roof.
- Metal roofs: Clamp systems where possible to reduce penetrations.
- Tile roofs: Specialized hooks and careful tile handling.
- Flat/low-slope: Ballasted or mechanically attached racking (engineering matters).
- Ground-mount: Fixed-tilt or tracking options depending on budget and space.
Options & upgrades
We plan the electrical side for safety, performance, and easy troubleshooting especially important when adding battery backup.
- Inverters: String inverters (centralized) or microinverters (panel-level). We’ll recommend based on shading, roof layout, and serviceability.
- Batteries: Whole-home backup or critical loads backup (most cost-effective).
- Monitoring: App-based production, consumption (optional CTs), alerts, and historical reporting.
- Flat/low-slope: Ballasted or mechanically attached racking (engineering matters).
- Ground-mount: Fixed-tilt or tracking options depending on budget and space.
Sizing & production (what we look at)
- Your last 12 months of kWh usage and seasonal peaks
- Roof orientation, tilt, usable area, and shading
- Panel wattage and layout (strings, microinverters, or optimizers)
- Service panel capacity and available breaker space
- Future loads (EV charger, pool equipment, shop tools, additions)
Monitoring & performance checks
We can help you set up monitoring so you can quickly see daily production, spot issues, and confirm your system is operating as expected.
- Track production trends and seasonal changes
- Set alerts for inverter faults or low production
- Compare production to weather and shading changes
- Plan cleaning/maintenance when output drops
Texas considerations (heat, hail, wind)
- Heat: We plan ventilation and equipment placement to reduce heat stress on inverters and batteries.
- Hail: Quality modules are tested for impact, but mounting and layout still matter especially at roof edges.
- Wind: Proper attachment, engineering, and edge-zone considerations help protect your investment.
- Storm outages: Hybrid + battery systems can keep essentials running when the grid is down.
Permitting & interconnection
Permitting requirements vary by city/county and utility provider. We’ll guide you through the typical steps: site review, electrical plan, permit submission, installation, inspection, and utility approval to operate (PTO).
Installation process & timelines
1) Consultation
goals, usage, roof/ground layout, and equipment options
2) Design
layout, electrical plan, and production estimate
3) Permits
submit and coordinate approvals
4) Install
racking, panels, wiring, inverter(s), and (optional) battery
5) Inspection
local inspection and corrections if needed
6) Utility PTO
interconnection approval and system turn-on
Permitting requirements vary by city/county and utility provider. We’ll guide you through the typical steps: site review, electrical plan, permit submission, installation, inspection, and utility approval to operate (PTO).
No. Grid-tied systems work without batteries and can still reduce your bill. Batteries add backup power and can help you use more of your solar energy at night.
Standard grid-tied solar shuts off for safety. With a hybrid inverter and battery (and the right electrical setup), you can power selected circuits during an outage.
Partial shade can reduce production. Microinverters or optimizers can help in many cases, and we’ll recommend the best layout for your roof faces and shading.
We use proper flashing and attachment methods designed for your roof type. Correct placement and sealing are critical for long-term performance.
Solar is low-maintenance. Occasional cleaning and periodic checks of monitoring/inverter status are usually enough. We can recommend a maintenance plan based on your location and roof pitch.
Many panels have long performance warranties. Inverters and batteries can have different warranty terms and lifespans—your equipment choice and installation environment matter.
Yes. We can install on many metal roof profiles and also build ground-mount systems for shops and commercial properties when roof space is limited.
Not always. We’ll evaluate your service panel capacity, breaker space, and code requirements. Some projects need a panel upgrade or a subpanel to meet safety and interconnection rules.
Yes. We can size your system with EV charging in mind and plan electrical capacity for a Level 2 charger.
Call 936.259.4040 or use our quote form. Share your address, roof type, and a recent electric bill (if available) so we can estimate system size and options.
Ready to price out a solar system?
Call 936.259.4040 or request a quote online—tell us your address, roof type, and your power goals.